Removal and Replacement Procedures
2-38
HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide
Figure 2-43: Removing the PCI riser board assembly
To install the PCI Express riser board:
Installing the PCI Express riser board option allows the use of high bandwidth-intensive
peripherals in your ProLiant server.
NOTE: For ease of reading, the PCI riser board assembly will simply be referred to as “assembly” in
the succeeding sections. Furthermore, in some figures, the plane section of the PCI riser board
assembly is dimmed out for clarity.
1.
Remove the PCI riser board assembly following the procedures described on page 2-37.
2.
Remove the default standard height/full-length PCI-X riser board from the assembly:
Keep the three screws you removed in this step for installing the PCI Express riser board
later.
a.
Remove the two screws securing the riser board to the assembly.
b.
Pull the riser board away from the assembly.
c.
Remove the spare screw located on the third tab of the assembly (from the slot cover
side).
All manuals and user guides at all-guides.com
