HP ProLiant BL e-Class Maintenance And Service Manual Download Page 5

Page: 5 / 84

Contents

List of Figures

1-1 Enclosure

components ........................................................................................................................ 1-2

1-2

Server blade components .................................................................................................................... 1-3

1-3

Server blade components .................................................................................................................... 1-4

2-1

Removing a hot-plug power supply.................................................................................................... 2-5

2-2

Extending the fan cage........................................................................................................................ 2-6

2-3

Removing a hot-plug fan .................................................................................................................... 2-7

2-4

Pressing the power button on a server blade....................................................................................... 2-8

2-5

Pressing the enclosure power button on the rear panel (cables removed for clarity)........................ 2-10

2-6

Disconnecting the power cords from the rear panel ......................................................................... 2-11

2-7

Removing the server blade from the enclosure................................................................................. 2-12

2-8

Removing a one-bay server blade blank ........................................................................................... 2-13

2-9

Removing a five-bay server blade blank........................................................................................... 2-13

2-10

Removing the interconnect tray from the enclosure ......................................................................... 2-14

2-11

Removing the enclosure from the rack ............................................................................................. 2-16

2-12

Opening the access door ................................................................................................................... 2-17

2-13

Disconnecting the fan cable from the power backplane ................................................................... 2-19

2-14

Removing the fan cage from the enclosure....................................................................................... 2-20

2-15

Removing the fan backplane assembly............................................................................................. 2-21

2-16

Removing the Integrated Administrator module from the interconnect tray .................................... 2-22

2-17

Disconnecting the enclosure status cable from the server blade backplane...................................... 2-23

2-18

Removing the enclosure status assembly from the enclosure........................................................... 2-24

2-19

Removing a DIMM........................................................................................................................... 2-25

2-20

DIMM socket keys for the ProLiant BL10e server blade................................................................. 2-25

2-21

DIMM socket keys for the ProLiant BL10e G2 server blade ........................................................... 2-26

2-22

Replacing a DIMM ........................................................................................................................... 2-26

2-23

Removing the hard drive assembly from a server blade ................................................................... 2-27

2-24

Locating and removing the battery ................................................................................................... 2-28

2-25

Removing the center wall assembly from the enclosure................................................................... 2-29

2-26

Installing the Integrated Administrator module onto the interconnect tray ...................................... 2-30

3-1

Installing a diagnostic adapter ............................................................................................................ 3-5

4-1

ProLiant C-GbE Interconnect Switch connectors............................................................................... 4-2

4-2

RJ-21 patch panel connectors ............................................................................................................. 4-3

4-3

RJ-45 patch panel connectors ............................................................................................................. 4-4

4-4

Fan cable connector on the center wall assembly ............................................................................... 4-5

4-5

Enclosure status cable connector on the server blade backplane........................................................ 4-5

4-6

Identifying the server blade connectors .............................................................................................. 4-6

4-7

Diagnostic adapter connectors ............................................................................................................ 4-7

4-8

Server blade and enclosure front panel buttons .................................................................................. 4-8

4-9

Enclosure rear panel buttons............................................................................................................... 4-9

4-10 Maintenance

switch .......................................................................................................................... 4-10

4-11

Enclosure front panel LEDs.............................................................................................................. 4-11

4-12

Rear panel LEDs with the interconnect switch interconnect tray ..................................................... 4-12

4-13

Rear panel LEDs with the RJ-21 patch panel interconnect tray ....................................................... 4-14

4-14

Rear panel LEDs with RJ-45 patch panel interconnect tray ............................................................. 4-16

4-15

Hot-plug fan health LEDs................................................................................................................. 4-17

4-16

Server blade LEDs ............................................................................................................................ 4-18

4-17

Diagnostic adapter LEDs .................................................................................................................. 4-19

HP ProLiant BL e-Class System Maintenance and Service Guide

HP CONFIDENTIAL

Codename: MacDuff Part Number: 249066-005 Last Saved On: 5/12/03 3:13 PM

Summary of Contents for ProLiant BL e-Class





















































































Search results

Summary of Contents for ProLiant BL e-Class

Reviews:

HP ProLiant BL e-Class, Maintenance And Service Manual, Page: 5 / 84

Search results

Summary of Contents for ProLiant BL e-Class

Reviews: