Removal and Replacement Procedures
Removing a Server Blade
CAUTION:
Integrated Administrator security settings are assigned to server blade bays, not
to server blades. If server blades change locations within the enclosure, Integrated
Administrator settings must also be adjusted to ensure accurate security. Refer to the
HP
ProLiant BL e-Class Integrated Administrator User Guide
for more information on security
settings.
To remove a server blade from the enclosure:
1. Power down the server blade. See the “Powering Down a Server Blade” section in this
chapter.
2. Press the release latch (1).
3. Pull down the ejector lever (2).
4. Remove the server blade from the enclosure (3).
Figure 2-7: Removing the server blade from the enclosure
Reverse steps 1 through 4 to replace a server blade.
2-12
HP ProLiant BL e-Class System Maintenance and Service Guide
HP CONFIDENTIAL
Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM
