Removal and Replacement Procedures
7. Place the enclosure on a level, nonconductive surface.
WARNING: A risk of injury from high current-electrical energy exists. Be sure the
power to the enclosure is completely shut off before opening the access door.
8. Release the latches on the access door (1).
9. Open the access door (2).
Figure 2-12: Opening the access door
Non-Hot-Plug Procedures
Before removing or replacing non-hot-plug components, you must power down the server
blade enclosure completely. Non-hot-plug components in the ProLiant BL e-Class system
include:
Fan cage
•
•
•
•
•
•
Fan backplane assembly
Interconnect tray
Integrated Administrator module
Enclosure status assembly
DIMM
HP ProLiant BL e-Class System Maintenance and Service Guide
2-17
HP CONFIDENTIAL
Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM