HP ProBook 640 G2 Maintenance And Service Manual Download

Page: 64 / 146

Removal and replacement procedures for
Authorized Service Provider parts

This chapter provides removal and replacement procedures for Authorized Service Provider only parts.

CAUTION:

Components described in this chapter should only be accessed by an authorized service provider.

Accessing these parts can damage the computer or void the warranty.

CAUTION:

This computer does not have user-replaceable parts. Only HP authorized service providers should

perform the removal and replacement procedures described here. Accessing the internal part could damage
the computer or void the warranty.

Component replacement procedures

NOTE:

Details about your computer, including model, serial number, product key, and length of warranty,

are on the service tag at the bottom of your computer. See

Locating system information on page 19

for

details.

NOTE:

HP continually improves and changes product parts. For complete and current information on

supported parts for your computer, go to

http://partsurfer.hp.com

, select your country or region, and then

follow the on-screen instructions.

There are as many as xx screws that must be removed, replaced, and/or loosened when servicing Authorized
Service Provider only parts. Make special note of each screw size and location during removal and
replacement.

Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for ProBook 640 G2



















































































































































Search results

Summary of Contents for ProBook 640 G2

Reviews:

Related manuals for ProBook 640 G2

Brands by name

Popular brands

HP ProBook 640 G2, Maintenance And Service Manual

Search results

Summary of Contents for ProBook 640 G2

Reviews:

Related manuals for ProBook 640 G2

Brands by name

Popular brands