3.
Remove the cable (3), and then remove the fingerprint reader (4).
Reverse this procedure to install the fingerprint reader.
Smart card reader
NOTE:
The smart card reader spare part kit includes the metal shield
Description
Spare part number
Smart card reader board (includes metal shield)
840694-001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal and
replacement
Before removing the smart card reader, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Service door (see
Service door on page 37
).
b.
Remove the battery (see
Battery on page 38
)
c.
Hard drive (see
Hard drive on page 39
).
d.
Solid-state drive (see
Solid-state drive (select products only) on page 41
).
e.
WWAN module (see
WWAN module (select products only) on page 42
).
74
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Summary of Contents for ProBook 640 G2
