IMPORTANT:
Make special note of each screw and screw lock size and location during removal and
replacement
Before removing the solid-state drive, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Service door (see
Service door on page 37
).
b.
Remove the battery (see
Battery on page 38
)
c.
Hard drive (see
Hard drive on page 39
).
Remove the solid-state drive:
▲
Remove 1 Phillips M2.0x8 screw (1), and then remove the solid-state drive (2).
Reverse this procedure to install the solid-state drive.
WWAN module (select products only)
NOTE:
The WWAN module spare part kit includes the cable.
Description
Spare part number
WWAN module
Foxconn Amstel LTE/EVDO/HSPA+ w/GPS M.2
822828-001
42
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Summary of Contents for ProBook 640 G2
