HP ProBook 640 G2 Maintenance And Service Manual Download

Page: 18 / 146

Left

NOTE:

Refer to the illustration that most closely matches your computer.

Component

Description

(1)

Security cable slot

Attaches an optional security cable to the computer.

NOTE:

The security cable is designed to act as a deterrent, but

it may not prevent the computer from being mishandled or
stolen.

(2)

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal for
the internal fan to cycle on and off during routine operation.

(3)

Optical drive (select products only)

Depending on your computer model, reads an optical disc or
reads and writes to an optical disc.

(4)

Optical drive light

Green: The optical drive is in use.

Off: The optical drive is off.

(5)

Optical drive eject button

Releases the optical drive disc tray.

(6)

Smart card reader

Supports optional smart cards.

Chapter 2 External component identification

Summary of Contents for ProBook 640 G2



















































































































































Search results

Summary of Contents for ProBook 640 G2

Reviews:

Related manuals for ProBook 640 G2

Brands by name

Popular brands

HP ProBook 640 G2, Maintenance And Service Manual

Search results

Summary of Contents for ProBook 640 G2

Reviews:

Related manuals for ProBook 640 G2

Brands by name

Popular brands