manualshive.com logo in svg

HP ProBook 4325s - Notebook PC, User Manual, Page: 66 / 196

Share
Download
HP ProBook 4325s - Notebook PC User Manual Download Page 66

Audio

Your computer enables you to use a variety of audio features:

●

Play music using your computer speakers and/or connected external speakers

●

Record sound using the internal microphone or connect an external microphone

●

Download music from the Internet

●

Create multimedia presentations using audio and images

●

Transmit sound and images with instant messaging programs

●

Stream radio programs (select models only) or receive FM radio signals

●

Create or “burn” audio CDs (select models only)

Connecting external audio devices

WARNING!

To reduce the risk of personal injury, adjust the volume before putting on headphones,

earbuds, or a headset. For additional safety information, refer to the 

Regulatory, Safety and

Environmental Notices

.

To connect external devices such as external speakers, headphones, or a microphone, refer to the
information provided with the device. For best results, remember the following tips:

●

Be sure that the device cable is securely connected to the correct jack on your computer. (Cable
connectors are normally color-coded to match the corresponding jacks on the computer.)

●

Be sure to install any drivers required by the external device.

NOTE:

A driver is a required program that acts like a translator between the device and the

programs that use the device.

Checking your audio functions

To check the system sound on your computer, follow these steps:

1.

Right-click the Volume icon on the taskbar, and then select 

Sounds

.

– or –

Select 

Start

 

>

 

Control Panel

 

>

 

Hardware and Sound

 

>

 

Sound

.

2.

When the Sound window opens, click the 

Sounds

 tab. Under 

Program Events

, select any sound

event, such as a beep or alarm, and click the 

Test

 button.

You should hear sound through the speakers or through connected headphones.

To check the record functions of the computer, follow these steps:

1.

Select 

Start

 

>

 

All Programs

 

>

 

Accessories

 

>

 

Sound Recorder

.

2.

Click 

Start Recording

 and speak into the microphone. Save the file to your desktop.

3.

Open Windows Media Player and play back the sound.

54

Chapter 4   Multimedia

Summary of Contents for ProBook 4325s - Notebook PC





































































































































































































Reviews:

No comments