HP ProBook 4325s - Notebook PC User Manual Download Page 174

Page: 174 / 196

Select

To do this

User Management > Create a New BIOS User Account
(requires a BIOS administrator password)

●

Select from a list of BIOS users.

●

Select from a list of ProtectTools users.

Password Policy (requires a BIOS administrator password)

Revise password policy criteria.

HP SpareKey

Enable/disable HP SpareKey (enabled by default).

Always Prompt for HP SpareKey Enrollment

Enable/disable HP SpareKey enrollment (enabled by default).

Fingerprint Reset on Reboot (If Present)

Reset/clear the fingerprint reader ownership (select models
only; disabled by default).

Change Password

Enter, change, or delete a BIOS administrator password.

HP SpareKey Enrollment

Enroll or reset HP SpareKey, which is a set of security
questions and answers used if you forget your password.

Anti Theft > AT-p (select models only)

Enable/disable Anti-Theft Protection.

DriveLock Password

●

Enable/disable DriveLock on any computer hard drive
(enabled by default).

●

Change a DriveLock user password or master password.

NOTE:

DriveLock settings are accessible only when you

enter Computer Setup by turning on (not restarting) the
computer.

Automatic DriveLock

Enable/disable Automatic DriveLock support (disabled by
default).

Disk Sanitizer

Run Disk Sanitizer to destroy all existing data on the primary
hard drive or the drive in the upgrade bay.

CAUTION:

If you run Disk Sanitizer, the data on the selected

drive is destroyed permanently.

System IDs

Enter a user-defined computer asset tracking number and
ownership tag.

System Configuration menu

NOTE:

Some of the listed System Configuration options may not be supported by your computer.

Select

To do this

Language

Change the Computer Setup language.

162 Chapter 13 Computer Setup

Summary of Contents for ProBook 4325s - Notebook PC





































































































































































































Search results

Summary of Contents for ProBook 4325s - Notebook PC

Reviews:

Related manuals for ProBook 4325s - Notebook PC

Brands by name

Popular brands

HP ProBook 4325s - Notebook PC, User Manual

Search results

Summary of Contents for ProBook 4325s - Notebook PC

Reviews:

Related manuals for ProBook 4325s - Notebook PC

Brands by name

Popular brands