HP ProBook 4325s - Notebook PC User Manual Download Page 127

Page: 127 / 196

Insert the card into the ExpressCard slot, and then push in on the card until it is firmly seated.

You will hear a sound when the device has been detected, and a menu of options may be displayed.

NOTE:

The first time you insert an ExpressCard, a message is displayed in the notification area

to let you know the device is recognized by the computer.

NOTE:

An inserted ExpressCard uses power even when idle. To conserve power, stop or remove an

ExpressCard when it is not in use.

Removing an ExpressCard

CAUTION:

To prevent loss of data or an unresponsive system, use the following procedure to safely

remove the ExpressCard.

Save your information and close all programs associated with the ExpressCard.

NOTE:

To stop a data transfer, click

Cancel

in the operating system Copying window.

To remove an ExpressCard:

Click the

Safely Remove Hardware and Eject Media

icon in the notification area, at the far right

of the taskbar.

NOTE:

To display the Safely Remove Hardware and Eject Media icon, click the

Show hidden

icons

icon (the arrow at the left side of the notification area).

Click the name of the ExpressCard in the list.

NOTE:

You are prompted that it is safe to remove the hardware device.

Release and remove the ExpressCard:

Gently press in on the ExpressCard

(1)

to unlock it.

Pull the ExpressCard out of the slot

(2)

Using ExpressCards (select models only) 115

Summary of Contents for ProBook 4325s - Notebook PC





































































































































































































Search results

Summary of Contents for ProBook 4325s - Notebook PC

Reviews:

Related manuals for ProBook 4325s - Notebook PC

Brands by name

Popular brands

HP ProBook 4325s - Notebook PC, User Manual

Search results

Summary of Contents for ProBook 4325s - Notebook PC

Reviews:

Related manuals for ProBook 4325s - Notebook PC

Brands by name

Popular brands