HP ProBook 4325s - Notebook PC User Manual Download Page 36

Page: 36 / 196

Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.

Replace the battery.

NOTE:

HP Mobile Broadband will be disabled if the battery is not replaced.

Turn the computer right-side up, and then reconnect external power and external devices.

10.

Turn on the computer.

Removing a SIM

To remove a SIM:

Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the
computer on by pressing the power button. Then, shut down the computer through the operating
system.

Close the display.

Disconnect all external devices connected to the computer.

Unplug the power cord from the AC outlet.

Turn the computer upside down on a flat surface, with the battery bay toward you.

Remove the battery.

Chapter 2 Wireless, modem, and local area network

Summary of Contents for ProBook 4325s - Notebook PC





































































































































































































Search results

Summary of Contents for ProBook 4325s - Notebook PC

Reviews:

Related manuals for ProBook 4325s - Notebook PC

Brands by name

Popular brands

HP ProBook 4325s - Notebook PC, User Manual

Search results

Summary of Contents for ProBook 4325s - Notebook PC

Reviews:

Related manuals for ProBook 4325s - Notebook PC

Brands by name

Popular brands