HP ProBook 4325s - Notebook PC User Manual Download Page 176

Page: 176 / 196

Select

To do this

NOTE:

Availability of these options varies by computer

model.

●

Enable/disable secondary battery fast charge (enabled by
default).

●

Enable/disable HP QuickLook (enabled by default).

●

Enable/disable preboot authentication on HP QuickLook
boot (enabled by default).

●

Enable/disable HP QuickWeb (enabled by default).

●

Enable/disable HP QuickWeb write protect (disabled by
default).

●

Enable/disable virtualization technology (select models
only; disabled by default).

●

Enable/disable Intel TXT (Trusted Execution Technology)
(select models only; disabled by default).

●

Enable/disable Multi Core CPU (enabled by default).

●

Enable/disable Intel HT technology (enabled by default).

●

Enable/disable wake on USB (enabled by default).

●

Enable/disable Num lock state at boot (disabled by
default).

164 Chapter 13 Computer Setup

Summary of Contents for ProBook 4325s - Notebook PC





































































































































































































Search results

Summary of Contents for ProBook 4325s - Notebook PC

Reviews:

HP ProBook 4325s - Notebook PC, User Manual, Page: 176 / 196

Search results

Summary of Contents for ProBook 4325s - Notebook PC

Reviews: