HP PAVILION DM3 Maintenance And Service Manual Download Page 25

Page: 25 / 122

Maintenance and Service Guide

3–1

Illustrated parts catalog

Service tag

When ordering parts or requesting information, provide the computer serial number and model number provided on
the service tag.

Item

Component

Description

Product name

This is the product name affixed to the front of the computer.

Serial number (s/n)

This is an alphanumeric identifier that is unique to each product.

Part number/Product number (p/n)

This number provides specific information about the product’s
hardware components. The part number helps a service
technician determine what components and parts are needed.

Model description

This is the alphanumeric identifier used to locate documents,
drivers, and support for the computer.

Warranty period

This number describes the duration of the warranty period for
the computer.

Summary of Contents for PAVILION DM3



























































































































Search results

Summary of Contents for PAVILION DM3

Reviews:

Related manuals for PAVILION DM3

Brands by name

Popular brands

HP PAVILION DM3, Maintenance And Service Manual

Search results

Summary of Contents for PAVILION DM3

Reviews:

Related manuals for PAVILION DM3

Brands by name

Popular brands