HP PAVILION DM3 Maintenance And Service Manual Download Page 20

Page: 20 / 122

2–6

Maintenance and Service Guide

External component identification

Left-side components

Item

Component

Description

Power connector

Connects an AC adapter.

AC adapter light

■

On: The computer is connected to external power.

■

Off: The computer is not connected to external power.

RJ-45 (network) jack

Connects a network cable.

External monitor port

Connects an external VGA monitor or projector.

HDMI port

Connects an optional video or audio device, such as a high-definition
television, or any compatible digital or audio component.

USB ports (2)

Connect optional USB devices.

✎

Select models can be configured with an optional external USB optical
disc drive. For more information, refer to the printed Quick Setup
poster.

Digital Media Slot

Supports the following digital card formats:

■

Memory Stick

■

Memory Stick Pro

■

MultiMediaCard

■

Secure Digital Memory Card

■

Secure Digital High Capacity Memory Card

■

xD-Picture Card

■

x-D-Picture Card Type H

■

x-D-Picture Card Type M

Audio-out (headphone) jack

Produces sound when connected to optional powered stereo speakers,
headphones, ear buds, a headset, or television audio.

✎

When a device is connected to the headphone jack, the computer
speakers are disabled.

Audio-in (microphone) jack

Connects an optional computer headset microphone, stereo array
microphone, or monaural microphone.

Summary of Contents for PAVILION DM3



























































































































Search results

Summary of Contents for PAVILION DM3

Reviews:

Related manuals for PAVILION DM3

Brands by name

Popular brands

HP PAVILION DM3, Maintenance And Service Manual

Search results

Summary of Contents for PAVILION DM3

Reviews:

Related manuals for PAVILION DM3

Brands by name

Popular brands