HP PAVILION DM3 Maintenance And Service Manual Download Page 49

Page: 49 / 122

Removal and replacement procedures

Maintenance and Service Guide

4–13

4. Disconnect the WLAN antenna cables

from the terminals on the WLAN module.

✎

The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The white WLAN
antenna cable is connected to the WLAN module “Aux” terminal.

5. Remove the two Phillips PM2.5x3.0 screws

that secure the WLAN module to the computer. (The WLAN

module tilts up.)

6. Remove the WLAN module

by pulling it away from the slot at an angle.

✎

WLAN modules are designed with a notch

to prevent incorrect insertion of the WLAN module into

the WLAN module slot.

Reverse this procedure to install the WLAN module.

Summary of Contents for PAVILION DM3



























































































































Search results

Summary of Contents for PAVILION DM3

Reviews:

Related manuals for PAVILION DM3

Brands by name

Popular brands

HP PAVILION DM3, Maintenance And Service Manual

Search results

Summary of Contents for PAVILION DM3

Reviews:

Related manuals for PAVILION DM3

Brands by name

Popular brands