HP PAVILION DM3 Maintenance And Service Manual Download Page 68

Page: 68 / 122

4–32

Maintenance and Service Guide

Removal and replacement procedures

Bluetooth module

✎

The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is
available as spare part number 580702-001.

Before removing the Bluetooth module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,

and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then

unplugging the AC adapter from the computer.

4. Remove the battery (see

“Battery” on page 4-6

5. Remove the top cover (see

“Top cover” on page 4-19

)

Remove the Bluetooth module and cable:

1. Remove the Phillips 2.0×4.0 screw

to release the Bluetooth module.

2. Lift the cable tape

to release the Bluetooth cable.

3. Remove the Bluetooth module

4. If you are replacing the Bluetooth cable, disconnect the Bluetooth module cable from the Bluetooth module.

Reverse this procedure to install the Bluetooth module and cable.

Description

Spare part number

Bluetooth module

537921-001

Summary of Contents for PAVILION DM3



























































































































Search results

Summary of Contents for PAVILION DM3

Reviews:

Related manuals for PAVILION DM3

Brands by name

Popular brands

HP PAVILION DM3, Maintenance And Service Manual

Search results

Summary of Contents for PAVILION DM3

Reviews:

Related manuals for PAVILION DM3

Brands by name

Popular brands