HP jetdirect 250m, User Manual

Page: 287 / 295

Setting an IP address
The easiest way to set an IP address on the print server is to use the
embedded web server. (You should consult with your network
administrator before you make any changes to the print server's
configuration, and notify other users of any change you will make.)
To set an IP address:
1. Open your browser and enter the print server's IP address as the
URL. (If you don't know the IP address, you can find it by
printing a configuration page .)
2. Click on the Networking tab in the page that appears.
3. On the Networking page, make sure that TCP/IP is selected.
4. Set the IP Configuration Method to Manual.
5. Enter the new IP address in the IP Address box.
Note that you will lose your connection to the embedded web server when
you change the IP address. To re-establish the connection, enter the new
IP address in your browser's URL field.
Performing a cold reset (resetting to factory defaults)
Once you configure the HP print server, the configuration settings are
retained in memory unless you manually reset them to factory defaults.
To reset the print server configuration to factory defaults, follow these
steps:
1. Make sure that the printer's power is on.
2. Unplug the print server from the printer.
3. While holding down the Test button on the print server, plug the
print server back into the printer; continue to hold down the Test
button for about five seconds. Any user-configured settings will
be erased.