HP jetdirect 250m, User Manual

Page: 86 / 295

The embedded web server provides several tabs to access
related features: {Home], [Device], and [Networking]. Each
tab provides menu item links (on the left side of the page) to
additional web pages.
• [Home] tab: As previously described, the [Home] tab
displays the home page of either the HP Jetdirect print
server or the attached device, depending on the
capabilities of the attached device. For more information,
see
HP Jetdirect [Home] Tab .
• [Device] tab: The [Device] tab is available only if the
attached device contains its own embedded web server
that is supported and accessible by the HP Jetdirect print
server. Device page features are device dependent (see the
Device page help system or related documentation).
• [Networking] tab: The [Networking] tab provides access
to network configuration parameters. See [Networking]
Tab for a description of the available networking menu
pages.
These pages may also provide additional links. For more
information, see
Other Links .
Operating Notes
• If you enter or change a configuration parameter value,
click Apply to enable your change, or click Cancel to erase
your change.
• Changes to the IP address will close the connection to the
embedded web server. To re-establish a connection, use
the new IP address.
CAUTION Changes to the IP address on the HP Jetdirect
print server will result in printing failures for
clients that have been configured to print through
this print server.
• Novell NetWare networks: The embedded web server
supports configuration parameters for Queue Server
Mode under NDS (Novell Directory Services) only.
NetWare Bindery and RPrinter Mode configuration are
not supported. To access NetWare configuration
parameters, click the IPX/SPX button on the Networking
page.
Note For a Novell NetWare network, you cannot create the
NDS print server, printer, and queue objects using the
embedded web server. To create these objects, use
other available tools or utilities.
Next topic: The Home tab