![background image](http://html.mh-extra.com/html/hp/jetdirect-250m/jetdirect-250m_user-manual_163690134.webp)
8
Set the IP address lease duration for your DHCP clients.
Then click
Next
.
HP recommends that all printers be assigned reserved IP
addresses. This can be accomplished after you set up the
scope (see step
11
).
9
Select
No
to configure DHCP options for this scope later.
Then click
Next
.
To configure DHCP options now, select
Yes
and click
Next
.
a.
If desired, specify the IP address of the router (or
default gateway) to be used by clients. Then click
Next
.
b.
If desired, specify the Domain Name and DNS
(Domain Name System) servers for clients. Click
Next
.
c.
If desired, specify WINS server names and IP
addresses. Click
Next
.
d.
Select
Yes
to activate the DHCP options now, and
click
Next
.
10
You have successfully set up the DHCP scope on this
server. Click
Finish
to close the wizard.
11
Configure your printer with a reserved IP address within
the DHCP scope:
a.
In the DHCP tree, open the folder for your scope and
select
Reservations
.
b.
Click the
Action
menu and select
New
Reservation
.
c.
Enter the appropriate information in each field,
including the reserved IP address for your printer.
(Note: the MAC address for your HP Jetdirect-
connected printer is available on the HP Jetdirect
configuration page.)
d.
Under "Supported types", select
DHCP only
, then
click
Add
. (Note: Selecting
Both
or
BOOTP only
will result in a configuration via BOOTP due to the
sequence in which HP Jetdirect print servers initiate
configuration protocol requests.)
e.
Specify another reserved client, or click
Close
. The
reserved clients added will be displayed in the
Reservations folder for this scope.
12
Close the DHCP manager utility.
NetWare Systems
Summary of Contents for jetdirect 250m
