HP jetdirect 250m, User Manual

Page: 61 / 295

Configure and Manage
the HP Jetdirect 200m and 250m print servers
This section describes the tools you can use to configure and manage your
print server, as well as the settings you can apply for various protocols.
Use this page to link to topics of interest.
Default configuration -- describes the print server's configuration as it
comes from the factory, and tells how to reset it to that configuration.
Software solutions matrix -- describes a variety of software tools that
you can use to install, configure, and manage a network printer. (These
are the same tools described in the
Install section.) These tools cover a
variety of functions in a variety of operating environments. In general,
they allow you to set parameters for the various protocols listed below.
Embedded Web server -- describes the Web server contained within
the print server. The embedded Web server provides another way to
configure and manage the print server.
Protocols -- provides information on configuring the various protocols
supported by the HP Jetdirect 200m and 250m print servers.
●
TCP/IP -- includes an overview of TCP/IP, as well as information
on these methods of applying TCP/IP parameters to the print
server:
❍
BOOTP/TFTP
❍
DHCP
❍
RARP
❍
arp and ping
❍
Telnet
❍
embedded Web server
●
LPD (line printer daemon) printing
●
FTP printing
●
DLC/LLC -- can be enabled or disabled; otherwise there are no
parameters to set on the Jetdirect module.
●
IPX/SPX -- in most cases, parameters do not need to be set on
the Jetdirect module.
●
AppleTalk -- Printer Name and Printer Zone parameters can be
set through the HP LaserJet Utility for MacOS .
Security features -- describes the security offered by the various ways
of configuring and managing the print server.