background image

 

FTP Printing 

Introduction 

 

FTP (File Transfer Protocol) is a basic TCP/IP connectivity 
utility to transfer data between systems. FTP printing is a way 
to use FTP to send print files from a client system to an HP 
Jetdirect-connected printer. In an FTP printing session, the 
client connects and sends a print file to the HP Jetdirect FTP 
server which in turn passes the print file to the printer. 

 

The HP Jetdirect FTP server can be enabled or disabled 
through a configuration tool, such as Telnet (see 

TCP/IP 

Configuration

) or the embedded web server (see 

Using the 

Embedded Web Server

). 

Requirements 

 

FTP printing described here requires the following: 

 

  HP Jetdirect print servers with firmware version x.20.01 

or later. 

 

  TCP/IP client systems with FTP that complies with RFC 

959. 

 

Note 

For the most recent list of tested systems, visit the HP 
Customer Care Online at 

 

http://www.hp.com/support/net_printing

 

Print Files 

 

The HP Jetdirect FTP server transfers print files to the printer 
but does not interpret them. For proper printing, print files 
must be in a language recognized by the printer (such as 
PostScript, PCL, or unformatted text). For formatted print 
jobs, you must first print to a file from your application using 
the driver for the selected printer, then transfer the print file to 
the printer through an FTP session. For formatted print files, 
use binary (image) type transfers. 

Using FTP Printing 

FTP Connections 

 

Similar to standard FTP file transfers, FTP printing uses two 
TCP connections: a control connection and a data connection. 

Summary of Contents for jetdirect 250m








































































































































































































































































































Reviews: