Restore Lock-to-Position and Smart Zoom
You can move, rotate, tilt, and zoom the map during navigation.
When you rotate, tilt, or zoom the map, the map follows your position but does not change the view
parameter you have modified. Tap
to return to the full
Smart Zoom
mode.
If you move the map, all parts of
Smart Zoom
are deactivated, and the view freezes. Tap
to
configure your Travel Companion to follow your position (
Lock-to-Position
) and re-enable
Smart
Zoom
.
Turning on
Restore Lock-to-Position
configures the Travel Companion to automatically lock to the
position after a few seconds of inactivity.
You can also set the time-out. Shorter delays are best if you tend to accidentally change the map display,
but you might prefer a longer delay if you often look for things around your position while driving.
WARNING!
Remember to look at the display only if it is absolutely safe to do so.
NOTE:
If you tap
before this automatic feature comes into effect,
Smart Zoom
and
Lock-to-Position
is re-enabled instantly.
Zoom in after find
When the
Zoom in after find
feature is turned off, the Travel Companion centers the map to the location
selected in
Go to
but does not change the zoom level. If you turn this feature on, the Travel Companion
zooms in to the selected point.
The zoom level in this case depends on the type of object you have searched for. For example, in the
case of a city search, the zoom level shows you the whole region/state or at least a significant part of it
around its centre. Selecting a
POI
, a junction or an exact address gives you a closer look with only a
few streets on the display.
Overview mode
Turn this feature on, and the
Overview
mode is triggered when the next turn is at a distance.
Turn distance determines when the Travel Companion switches to the
Overview
and back to the
Navigation
view. If the distance from the next route event is more than the value set here, the map view
switches to
Overview
mode, a top-down, North-up oriented map view with a zoom level that enables
you to see a larger part of the map around your position. As you approach the route event, normal
navigation returns automatically.
The
Overview
zoom level determines the fixed zoom level of the map in the
Overview
mode. You can
change the zoom level manually at any time, but when you enter the
Overview
mode again, the zoom
level is reset to this value.
Sound settings
You can configure the parameters to determine the sounds and sound alerts on your Travel Companion
on this screen.
Sound settings
59
