HP Integrity Superdome 2 User Manual Download Page 71

Page: 71 / 191

•

Unknown

•

Informational

Enclosure settings

Enclosure Settings screen

This section provides detailed procedures to configure the management functionality provided by
the HP Superdome 2 Onboard Administrator.

Select the tree view menu item

Enclosure Information

to view the enclosure Status screen.

Table 6 Status overview information

Description

Item

The overall status of the enclosure. Possible values are Unknown, OK, Degraded, and Failed.

Enclosure Status

The overall status of the active Onboard Administrator. Possible values are Unknown, OK,
Degraded, and Failed.

Active OA Status

The overall status of the standby Onboard Administrator. Possible values are Absent, Unknown,
OK, Degraded, and Failed.

Standby OA Status

The power redundancy mode. Possible values are AC Redundant, Power Supply Redundant,
Not Redundant, or Unknown. For information on these modes, see the HP Integrity Superdome
2 User Guide.

Power Mode

Enclosure settings

Summary of Contents for Integrity Superdome 2
































































































































































































Search results

Summary of Contents for Integrity Superdome 2

Reviews:

Related manuals for Integrity Superdome 2

Brands by name

Popular brands

HP Integrity Superdome 2, User Manual

Search results

Summary of Contents for Integrity Superdome 2

Reviews:

Related manuals for Integrity Superdome 2

Brands by name

Popular brands