![background image](http://html.mh-extra.com/html/hp/integrity-superdome-2/integrity-superdome-2_user-manual_164486162.webp)
Current enclosure inventory
To download a script of the current enclosure inventory, click the
Click here
link, and then the
current enclosure inventory opens in a new browser window. To save the inventory as a text file,
select either of the following options:
•
If you are using Microsoft Internet Explorer 6.0, select
Save As
.
•
If you are using Mozilla Firefox 1.5, select
Save Page As
.
The downloaded text file provides the same information as a CLI
SHOW ALL
command. The text
file also displays the current configuration for the enclosure.
USB Support
This box appears when a USB key is detected in the Active Onboard Administrator USB port and
configuration files are present. To download a configuration file, select a file from the menu, and
then click the
Apply
button. To save the current Onboard Administrator configuration file to the
USB key, enter a filename with a .cfg extension, and then click the
Apply
button.
Reset Factory Defaults screen
When you reset the enclosure to the factory defaults, all enclosure settings are reset except the
built-in Administrator password. All AlertMail, Network and Network Protocol, SNMP, and Power
Management settings are reset.
To reset the enclosure click the
Reset Factory Defaults
buttons. A confirmation screen appears,
asking if you are sure that you want to perform the action. To confirm resetting the enclosure, click
OK
, or to exit without resetting the enclosure to factory defaults, click
Cancel
.
To download a current configuration for the enclosure:
1.
Click the
Click here
link. The configuration opens in a new browser window.
2.
To save the configuration, as a text file, select either of the following options:
•
If you use Microsoft Internet Explorer 7 or later, select
Save As
.
•
If you use Mozilla Firefox 2 or later, select
Save Page As
.
For security, the retrieved current configuration does not contain any user passwords. You can
manually edit the script to add the user passwords after the user name on the ADD USER lines.
The enclosure Administrator account password cannot be added from the configuration script.
Also, the retrieved current configuration does not contain any of the LCD settings (Lock Buttons,
Enable PIN Protection, and PIN Code). These settings cannot be added from the configuration
script.
162
Using configuration scripts