•
Delete Users
: Select a user or users to be deleted by selecting the check box next to the name
of the user, and click the
Delete Users
button. You cannot delete your own account or the
built-in Administrator account.
•
Disable Users
: Select a user or users to be disabled by selecting the check box next to the
name of the user, and click the
Disable Users
button. You cannot disable your own account
or the built-in Administrator account.
•
Terminate Sessions
: Select a user or users whose sessions you want to end by selecting the
check box next to the name of the user, and click the
Terminate Sessions
button. You cannot
end your own session.
Session Options tab
This screen enables you to specify the length of time a user session is valid if there is no activity.
Sessions are checked every 5 minutes to see if they have been inactive for the amount of time
specified by the system administrator. If any sessions have been inactive for the specified amount
of time, they are removed from the system.
Session Timeout
: The number of minutes before an inactive session becomes invalid. Session Timeout
can be any value between 10 and 1440 (24 hours). The default value for Session Timeout is 1440.
After entering a Session Timeout value, click the
Apply
button.
Insight Display
All Onboard Administrator GUI users can access the Insight Display screens by selecting
Insight
Display
from the Tree View or Rack Overview.
The Security tab can lock the Insight Display buttons and set a PIN code and enable PIN protection.
The User Note tab enables note text to be edited.
The Background tab allows a 320x240 px Windows bitmap to be uploaded as the user note
background image.
The Chat Mode tab enables an administrator to initiate a chat with a user at the enclosure using
the Insight Display.
Management network IP dependencies
Onboard Administrators management port enables external clients to connect through Onboard
Administrator to iLOs and interconnect management processors that are configured to use Onboard
Administrators internal management network.
Onboard Administrator firmware bridges the client traffic to the enclosure from the management
port to the internal enclosure management network if the destination IP address is not Onboard
Administrator. Onboard Administrator creates a route table entry for each server iLO 3 IP address
in an enclosure. This enables Onboard Administrator to conduct IP communications with that iLO
3. These iLO 3 route table entries enable you to configure each iLO 3 network in a different subnet
than Onboard Administrator. Each iLO 3 is configured with a valid gateway on its subnet that is
accessible through Onboard Administrators external management port connection. Routers must
be present on the network connected to Onboard Administrator management port to provide the
multiple subnets and gateways on the management network. Use of different subnets to attempt to
isolate iLO 3s and Onboard Administrator management is not complete isolation of those networks.
150
Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices
