manualshive.com logo in svg

HP FlexFabric 7900 Series, Command Reference Manual

The HP FlexFabric 7900 Series is a cutting-edge networking solution designed for high-performance data centers. To assist users in maximizing its potential, a comprehensive Command Reference Manual is available for free download on our website. Get the most out of your device, download the manual now from manualshive.com.

Share
Download
background image

 

207 

Parameters 

chassis 

chassis-number

: Specifies an IRF member device by its member ID. (In IRF mode.)  

slot

 slot-number

: Specifies a card by its slot number. 

Usage guidelines 

In standalone mode, the command displays electronic label information for all cards if you do not 
specify the 

slot

 slot-number

 option. 

In IRF mode, the command displays electronic label information for all members if you do not specify 
the 

chassis 

chassis-number

 option. If you specify the 

chassis 

chassis-number

 option but do not 

specify the 

slot

 slot-number

 option, the command displays electronic label information for all cards 

on the specified member. 

An electronic label is a profile for a device or card and contains the permanent configuration 
including the serial number, manufacturing date, MAC address, and vendor name. The data is 
written to the storage component during debugging or testing. 

Examples 

# In standalone mode, display electronic label information for the device.  

<Sysname> display device manuinfo 

Chassis self                                                                     

 DEVICE_NAME          : HPE FlexFabric 7910 Switch Chassis (JG841A) 

 DEVICE_SERIAL_NUMBER : 210235A1AUH138000008                                     

 MAC_ADDRESS          : 7425-8AC7-23E4                                           

 MANUFACTURING_DATE   : 2015-08-19                                               

 VENDOR_NAME          : HPE                                                      

 Slot 1 CPU 0:                                                                          

 DEVICE_NAME          : HPE FlexFabric 7900 12-port 40GbE QSFP+ SA Module(JG683A)  

 DEVICE_SERIAL_NUMBER : 210231A2KVH138000019                                     

 MAC_ADDRESS          : 7425-8AC7-2DC4                                           

 MANUFACTURING_DATE   : 2015-08-24                                               

 VENDOR_NAME          : HPE                                                      

 Slot 10 CPU 0:                                                                          

 DEVICE_NAME          : HPE FlexFabric 7910 2.4Tbps Fabric/Main Processing Unit(JH001A) 

 DEVICE_SERIAL_NUMBER : 210231A2QPH143000006                                     

 MAC_ADDRESS          : 7425-8AC7-2D10                                           

 MANUFACTURING_DATE   : 2015-08-24                                               

 VENDOR_NAME          : HPE                                                      

Fan 1                                                                            

  DEVICE_NAME          : HPE FlexFabric 7910 Back (Power side) to Front (Port side) Airflow 

Fan Tray(JG844A)                                            

 DEVICE_SERIAL_NUMBER : 210231A2L1H138000018                                     

 MAC_ADDRESS          : NONE                                                     

 MANUFACTURING_DATE   : 2015-08-10                                               

 VENDOR_NAME          : HPE                                                      

Fan 2                                                                            

  DEVICE_NAME          : HPE FlexFabric 7910 Back (Power side) to Front (Port side) Airflow 

Fan Tray(JG844A)                                            

 DEVICE_SERIAL_NUMBER : 210231A2L1H138000011                                     

 MAC_ADDRESS          : NONE                                                     

 MANUFACTURING_DATE   : 2015-08-10                                               

 VENDOR_NAME          : HPE                                                      

Summary of Contents for FlexFabric 7900 Series







































































































































































































































































































Reviews:

No comments

Related manuals for FlexFabric 7900 Series

Hama USB Hub Operating Instruction preview
USB Hub
Brand: Hama Pages: 14
Hama Super Speed USB 3.0 Hub Operating Instruction preview
Super Speed USB 3.0 Hub
Brand: Hama Pages: 14
Hama S1110 Operating Instruction preview
S1110
Brand: Hama Pages: 12
Hama 78496 Operating Instruction preview
78496
Brand: Hama Pages: 14
Hama Premium Silver USB 2.0 Hub 1:4 Operating Instruction preview
Premium Silver USB 2.0 Hub 1:4
Brand: Hama Pages: 12
Hama S2110 Operating Instruction preview
S2110
Brand: Hama Pages: 18
Hama uRage Vendetta 210 Manual preview
uRage Vendetta 210
Brand: Hama Pages: 36
IDEC HS5L Series Instruction Sheet preview
HS5L Series
Brand: IDEC Pages: 8
IDEM SAFETY SWITCHES MPR Operating Instructions preview
MPR
Brand: IDEM SAFETY SWITCHES Pages: 2
H3C S5560S-EI Series Troubleshooting Manual preview
S5560S-EI Series
Brand: H3C Pages: 37
3Com OfficeConnect WX4400 Reference Manual preview
OfficeConnect WX4400
Brand: 3Com Pages: 528
Penguin Edge RTM-ATCA-F140 Quick Start Manual preview
Edge RTM-ATCA-F140
Brand: Penguin Pages: 2
Aethra MTX200 Connection Manual preview
MTX200
Brand: Aethra Pages: 1
MuxLab HM44 User Manual preview
HM44
Brand: MuxLab Pages: 32
JetNet 5018G Series Quick Installation Manual preview
5018G Series
Brand: JetNet Pages: 20
Guntermann & Drunck UCON/s Getting Started preview
UCON/s
Brand: Guntermann & Drunck Pages: 8
3onedata IES2016-16T Series Quick Installation Manual preview
IES2016-16T Series
Brand: 3onedata Pages: 3
Lantech LGS-2424C User Manual preview
LGS-2424C
Brand: Lantech Pages: 80

Brands by name

Popular brands

Load more brands