HP FlexFabric 7900 Series Command Reference Manual Download Page 47

Page: 47 / 294

Syntax

telnet

remote-host

[

service-port

] [

vpn-instance

vpn-instance-name

] [

source

{

interface

interface-type interface-number

ip-address

} ] [

dscp

dscp-value

]

Views

User view

Predefined user roles

network-admin

mdc-admin

Parameters

remote-host

: Specifies the IPv4 address or host name of a remote host. A host name can be a

case-insensitive string of 1 to 253 characters. Valid characters for a host name include letters, digits,
hyphens (-), underscores (_), and dots (.).

service-port

: Specifies the TCP port number for the Telnet service on the remote host. The value

range is 0 to 65535 and the default is 23.

vpn-instance

vpn-instance-name

: Specifies the VPN instance to which the remote host belongs,

where vpn-instance-name is a case-sensitive string of 1 to 31 characters. If the remote host belongs
to the public network, do not specify this option.

source

: Specifies a source IPv4 address or source interface for outgoing Telnet packets.

interface

interface-type interface-number

: Specifies the source interface. The primary IPv4 address

of the interface will be used as the source IPv4 address for outgoing Telnet packets.

ip-address

: Specifies the source IPv4 address for outgoing Telnet packets.

dscp

dscp-value

: Specifies the DSCP value for IP to use in outgoing Telnet packets to indicate the

packet transmission priority, in the range of 0 to 63. The default is 48.

Usage guidelines

This command is not supported in FIPS mode.

To terminate the current Telnet connection, press

Ctrl+K

or execute the

quit

command.

The source IPv4 address or source interface that is specified by this command is only applicable to
the current Telnet connection.

Examples

# Telnet to host 1.1.1.2, using 1.1.1.1 as the source IP address for outgoing Telnet packets.

<Sysname> telnet 1.1.1.2 source ip 1.1.1.1

Related commands

telnet client source

telnet client source

Use

telnet client source

to specify a source IPv4 address or source interface for outgoing Telnet

packets when the device serves as a Telnet client.

Use

undo telnet client source

to remove the configuration.

Syntax

telnet client source

{

interface

interface-type interface-number

ip-address

}

undo telnet client source

Summary of Contents for FlexFabric 7900 Series







































































































































































































































































































Search results

Summary of Contents for FlexFabric 7900 Series

Reviews:

Related manuals for FlexFabric 7900 Series

Brands by name

Popular brands

HP FlexFabric 7900 Series, Command Reference Manual

Search results

Summary of Contents for FlexFabric 7900 Series

Reviews:

Related manuals for FlexFabric 7900 Series

Brands by name

Popular brands