manualshive.com logo in svg

HP FlexFabric 7900 Series, Command Reference Manual

The HP FlexFabric 7900 Series is a cutting-edge networking solution designed for high-performance data centers. To assist users in maximizing its potential, a comprehensive Command Reference Manual is available for free download on our website. Get the most out of your device, download the manual now from manualshive.com.

Share
Download
background image

 

149 

Predefined user roles 

network-admin 

network-operator 

mdc-admin 

mdc-operator 

Usage guidelines 

Current startup configuration file is the configuration file that has been loaded. Next-startup 
configuration file is the configuration file used at the next startup. 

In standalone mode on an HPE 7910/HPE 7910 TAA switch, the standby MPU always uses the 
same current startup configuration file as the active MPU. After an active/standby switchover, it is 
normal that the current startup configuration files on them are displayed as NULL. This is because 
the new active MPU continues to run with the running configuration rather than rebooting with the 
previous current startup configuration file. 

In IRF mode, the global standby MPUs always use the same current startup configuration file as the 
global active MPU. After an active/standby switchover, it is normal that the current startup 
configuration files on them are displayed as NULL. This is because the new global active MPU 
continues to run with the running configuration rather than rebooting with the previous current startup 
configuration file. 

Examples 

# (In standalone mode.) Display startup configuration files on an HPE 7910/HPE 7910 TAA switch. 

<Sysname> display startup 

MainBoard: 

 Current startup saved-configuration file: flash:/startup.cfg 

 Next main startup saved-configuration file: flash:/startup.cfg 

 Next backup startup saved-configuration file: NULL 

Slot 11: 

 Current startup saved-configuration file: flash:/startup.cfg 

 Next main startup saved-configuration file: flash:/startup.cfg 

 Next backup startup saved-configuration file: NULL 

Table 19 Command output 

Field Description 

MainBoard 

Displays the startup configuration files on the active MPU. 

Current startup saved-configuration file 

Configuration file that the active MPU has started up with. 

Next main startup saved-configuration file 

Primary startup configuration file to be used at the next 
startup. 

Next backup startup saved-configuration file

Backup startup configuration file to be used at the next 
startup. 

Slot 

n

 

Displays the startup configuration files on the standby MPU 
in slot 

n

. 

 

# (In IRF mode.) Display startup configuration files on an HPE 7910/HPE 7910 TAA IRF fabric. 

<Sysname> display startup 

MainBoard: 

 Current startup saved-configuration file: NULL 

 Next main startup saved-configuration file: flash:/startup.cfg 

 Next backup startup saved-configuration file: flash:/startup2.cfg 

Summary of Contents for FlexFabric 7900 Series







































































































































































































































































































Reviews:

No comments

Related manuals for FlexFabric 7900 Series

UNICOM FEP-31024T-3 Specifications preview
FEP-31024T-3
Brand: UNICOM Pages: 1
Cabletron Systems SynOptics 3000 Series Manual preview
SynOptics 3000 Series
Brand: Cabletron Systems Pages: 101
UfiSpace S9180-32X Hardware Installation Manual preview
S9180-32X
Brand: UfiSpace Pages: 25
Equip Vision 332702 Manual preview
Vision 332702
Brand: Equip Pages: 10
3onedata ES1026-2F Quick Installation Manual preview
ES1026-2F
Brand: 3onedata Pages: 2
Taiden TMX-0404SDI Installation And Operation Manual preview
TMX-0404SDI
Brand: Taiden Pages: 21
Quartz Q16 System Manual preview
Q16
Brand: Quartz Pages: 43
ATEN CS62T User Manual preview
CS62T
Brand: ATEN Pages: 21
Gefen HDTV-441 Manual preview
HDTV-441
Brand: Gefen Pages: 9
NVision NV3128 Instruction Manual preview
NV3128
Brand: NVision Pages: 92
Lindy 25018 User Manual preview
25018
Brand: Lindy Pages: 2
Dahua D-PFS3110-8ET1GT1GF-96 Quick Start Manual preview
D-PFS3110-8ET1GT1GF-96
Brand: Dahua Pages: 17
AMX AVS-OP-2416-340 Specifications preview
AVS-OP-2416-340
Brand: AMX Pages: 1
Greengate ONW-D-1001-347-W Installation Instructions preview
ONW-D-1001-347-W
Brand: Greengate Pages: 2
EnGenius ESW-8228 User Manual preview
ESW-8228
Brand: EnGenius Pages: 72
Huanyu HR3 Series Installation And Operation Instruction Manual preview
HR3 Series
Brand: Huanyu Pages: 10
Unilamp Luzense RADIM RF Instruction Manual preview
Luzense RADIM RF
Brand: Unilamp Pages: 2
ProSum Prima IP-16 User Manual preview
Prima IP-16
Brand: ProSum Pages: 92

Brands by name

Popular brands

Load more brands