142
As a best practice, set the allowed delay time in the following situations:
•
The user configures the device remotely. The user might be disconnected from the device
because of a setting. If the
configuration commit delay
command is configured and the
setting is not committed, the user can reconnect to the device after the delay time expires.
•
The user is not familiar with the device configuration. If any parameters are configured
incorrectly, the rollback mechanism can remove the incorrect settings after the delay time
expires.
You can change the allowed delay time before the previous configured delay time expires. The new
delay time configuration overwrites the previous delay time configuration after you enter
Y
to confirm
the change. The allowed delay time is re-set.
Examples
# Set the allowed delay time to 10 minutes for a manual commit to keep the settings configured
subsequently in effect.
<Sysname> system-view
[Sysname] configuration commit delay 10
# Re-set the allowed delay time to 60 minutes for a manual commit to keep the settings configured
subsequently in effect.
[Sysname] configuration commit delay 60
The commit delay already set 10 minutes, overwrite it? [Y/N]:y
# Re-set the allowed delay time to 20 minutes for a manual commit to keep the settings configured
subsequently in effect. In this example, the configuration fails, because the previous configured
delay time has expired. The device is rolling back the configuration to the settings before the
configuration commit delay
command was executed the previous time.
[Sysname] configuration commit delay 20
The system is rolling back configuration. Please wait…
configuration encrypt
Use
configuration encrypt
to enable configuration encryption.
Use
undo configuration encrypt
to restore the default.
Syntax
configuration encrypt
{
private-key
|
public-key
}
undo configuration encrypt
Default
Configuration encryption is disabled. The running configuration is saved to a configuration file
without encryption.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
private-key
: Encrypts configuration with a private key. All HPE devices running Comware V7
software use the same private key.
public-key
: Encrypts configuration with a public key. All HPE devices running Comware V7 software
use the same public key.