HP FlexFabric 7900 Series Command Reference Manual Download Page 263

Page: 263 / 294

255

[Sysname-schedule-saveconfig] time once at 12:00 week-day mon fri

# Configure the device to execute schedule

saveconfig

after 10 minutes.

<Sysname> system-view

[Sysname] scheduler schedule saveconfig

[Sysname-schedule-saveconfig] time once delay 10

Related commands

scheduler schedule

time repeating

Use

time repeating

to specify an execution time table for a periodic schedule.

Use

undo time

to delete the execution time table configuration for a periodic schedule.

Syntax

time repeating

[

time

[

date

] ]

interval

interval-time

time

repeating at

time

[

month-date

[

month-day

last

] |

week-day

week-day

&<1-7> ]

undo time

Default

No execution time table is specified for a periodic schedule.

Views

Schedule view

Predefined user roles

network-admin

mdc-admin

Parameters

time

: Specifies the execution time in the

hh:mm

format, where

is in the range of 0 to 23, and

is in the range of 0 to 59. If you do not specify this option, the current system time is used as the

execution time.

date

: Specifies the start date for the periodic schedule, in the

MM/DD/YYYY

YYYY/MM/DD

format.

The

YYYY

value is in the range of 2000 to 2035, the

value is in the range of 1 to 12, and the

value range for

depends on the month value. If you do not specify this argument, the execution

start date is the first day when the specified time arrives.

interval

interval-time

: Specifies the execution time interval in the

hh:mm

format. This

argument can contain up to six characters. When in the

hh:mm

format,

must be in the range of 0

to 59. When in the

format, this argument must be a minimum of 1 minute.

month-date

[

month-day

last

]: Specifies a day in a month, in the range 1 to 31. The

last

keyword

indicates the last day of a month. If you specify a day that does not exist in a month, the configuration
takes effect on that day in the next month.

week-day

week-day

&<1-7>: Specifies one or more week days. Valid values include

Mon

Tue

Wed

Thu

Fri

Sat

, and

Sun

. <1-7> means that you can specify 1 to 7 week days. To specify multiple week

days, separate the values with spaces.

Usage guidelines

The

time repeating

[

time

[

date

] ]

interval

interval-time

command configures the device to

execute a schedule at an interval from the specified time on.

Summary of Contents for FlexFabric 7900 Series







































































































































































































































































































Search results

Summary of Contents for FlexFabric 7900 Series

Reviews:

Related manuals for FlexFabric 7900 Series

Brands by name

Popular brands

HP FlexFabric 7900 Series, Command Reference Manual

Search results

Summary of Contents for FlexFabric 7900 Series

Reviews:

Related manuals for FlexFabric 7900 Series

Brands by name

Popular brands