141
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
You must execute the
configuration commit delay
command before executing this command.
As a best practice, enable the information center and configure the information center to output logs
to the console. Determine whether to commit the settings depending on the logs. For more
information about the information center, see
Network Management and Monitoring Configuration
Guide
.
Examples
# Set the allowed delay time to 10 minutes for a manual commit to keep the settings configured
subsequently in effect.
<Sysname> system-view
[Sysname] configuration commit delay 10
# Commit the settings configured after the
configuration commit delay
command was executed.
[Sysname] configuration commit
# Commit the settings configured after the
configuration commit delay
command was executed. In
this example, the commit operation fails, because the allowed delay time has expired. The device is
rolling back the configuration to the settings before the
configuration commit delay
command was
executed.
[Sysname] configuration commit
The system is rolling back configuration. Please wait…
configuration commit delay
Use
configuration commit delay
to set the allowed delay time for a manual commit to keep the
settings configured subsequently in effect.
Syntax
configuration commit delay
delay-time
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
delay-time
: Sets the allowed delay time in the range of 1 to 65535 minutes.
Usage guidelines
Configure this command in a single-user environment.
If you do not execute the
configuration commit
command within the delay time, the device rolls
back the configuration to the settings before the
configuration commit delay
command was
executed. The device outputs logs to notify the user of the rollback operation. The user cannot
perform other operations before the rollback is finished.
