HP FlexFabric 7900 Series, Command Reference Manual

Page: 200 / 294

192
<Sysname> system-view
[Sysname] clock protocol ntp
clock summer-time
Use clock summer-time to configure the device to use daylight saving time during a specific period
of time.
Use undo clock summer-time to cancel the configuration.
Syntax
clock summer-time name start-time start-date end-time end-date add - time
undo clock summer-time
Default
Daylight saving time is disabled.
Views
System view
Pre-defined user roles
network-admin
mdc-admin
Parameters
name : Specifies a name for the daylight saving time schedule, a case-sensitive string of 1 to 32
characters.
start-time : Specifies the start time in the hh:mm:ss format. The hh value is in the range of 0 to 23, the
mm value is in the range of 0 to 59, and the ss value is in the range of 0 to 59. The leading zero in a
segment can be omitted. If the seconds segment is 0 ( hh : mm :00), you can omit it. If both the minutes
and seconds segments are 0 ( hh :00:00), you can omit both of the segments. For example, to specify
08:00:00, you can enter 8.
start-date : Specifies the start date in one of the following formats:
•
MM/DD . The MM value is in the range of 1 to 12, and the value range for DD depends on the
month value.
•
month week date , where:
{
month —Takes January , February , March , April , May , June , July , August , September ,
October , November or December .
{
week —Represents week of the month. It takes first , second , third , fourth , fifth , or last .
{
day —Takes Sunday , Monday , Tuesday , Wednesday , Thursday , Friday , or Saturday .
end-time : Specifies the end time in the hh:mm:ss format. The hh value is in the range of 0 to 23, the
mm value is in the range of 0 to 59, and the ss value is in the range of 0 to 59. The leading zero in a
segment can be omitted. If the seconds segment is 0 ( hh : mm :00), you can omit it. If both the minutes
and seconds segments are 0 ( hh :00:00), you can omit both of the segments. For example, to specify
08:00:00, you can enter 8.
end-date : Specifies the end date in one of the following formats:
•
MM/DD . The MM value is in the range of 1 to 12, and the value range for DD depends on the
month value.
•
month week date , where:
{
month —Takes January , February , March , April , May , June , July , August , September ,
October , November or December .