HP ESA-L1500A, User'S And Calibration Manual

Page: 170 / 326

Chapter 7 169
Specifications
General
Specifications Supplemental Information
Immunity Testing
Radiated Immunity Testing was done at 3 V/m
according to IEC 801-3/1984.
When the analyzer tuned
frequency is identical to the
immunity test signal
frequency there may be
signals of up to
−
60 dBm
displayed on the screen.
Electrostatic Discharge Air discharges of up to 8 kV
were applied according to IEC
801-2/1991. Discharges to
center pins of any of the
connectors may cause damage
to the associated circuitry.
Specifications Supplemental Information
Power Requirements
AC Operation
Voltage 90 to 250 V rms
Frequency 47 to 440 Hz
Power Consumption, On <200 W
Power Consumption,
Standby <5 W
DC Operation
Serial prefix <US3745
Voltage 15 to 20 Vdc
Power Consumption <175 W
Serial prefix
≥
US3745
Voltage, turn-on 12 to 22 Vdc For initial voltage
≥
16 Vdc,
turn-off voltage = 16 Vdc.
For initial voltage <16 Vdc,
turn-off voltage = 11.5 Vdc.
Power Consumption, On <175 W
Power Consumption,
Standby <1 W