HP Bc1500 - BladeSystem - Blade PC Reference Manual Download Page 79

Page: 79 / 432

HP PC Blade Switch CLI Reference Guide

www.hp.com

5-11

Address Table Commands

port security mode

The

port security mode

Interface Configuration mode command configures the port security

mode. To return to the default configuration, use the

form of this

command.

Syntax

port security mode

{

lock

dynamic

}

no port security mode

Parameters

■

lock

— Saves the current dynamic MAC addresses associated with the port and disables

learning, relearning and aging.

■

dynamic

— Deletes the current dynamic MAC addresses associated with the port and learns

up to the maximum number addresses allowed on the port. Relearning and aging are enabled.

Default Setting

This setting is disabled.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

Command Usage

There are no user guidelines for this command.

Example

In the following command, the port security mode is set to dynamic for Ethernet interface 1/e7.

Console(config)#

interface ethernet

1/e7

Console(config-if)#

port security mode dynamic

Summary of Contents for Bc1500 - BladeSystem - Blade PC

















































































































































































































































































































































































































































Search results

Summary of Contents for Bc1500 - BladeSystem - Blade PC

Reviews:

Related manuals for Bc1500 - BladeSystem - Blade PC

Brands by name

Popular brands

HP Bc1500 - BladeSystem - Blade PC, Reference Manual

Search results

Summary of Contents for Bc1500 - BladeSystem - Blade PC

Reviews:

Related manuals for Bc1500 - BladeSystem - Blade PC

Brands by name

Popular brands