HP Bc1500 - BladeSystem - Blade PC, Reference Manual

Page: 273 / 432

HP PC Blade Switch CLI Reference Guide www.hp.com 21-3
SNMP Commands
snmp-server view
The snmp-server view Global Configuration mode command creates or updates a Simple
Network Management Protocol (SNMP) server view entry. To remove a specified SNMP server
view entry, use the
no form of this command.
Syntax
snmp-server view view-name oid-tree { included | excluded }
no snmp-server view view-name [ oid-tree ]
Parameters
■
view-name — Specifies the label for the view record that is being created or updated. The
name is used to reference the record. (Range: 1-30 characters)
■
oid-tree — Specifies the object identifier of the ASN.1 subtree to be included or excluded
from the view. To identify the subtree, specify a text string consisting of numbers, such as
1.3.6.2.4, or a word, such as system. Replace a single sub-identifier with the asterisk (*)
wildcard to specify a subtree family; for example 1.3.*.4.
■
included — Indicates that the view type is included.
■
excluded — Indicates that the view type is excluded.
Default Setting
No view entry exists.
Command Mode
Global Configuration mode
Command Usage
This command can be entered multiple times for the same view record.
The number of views is limited to 64.
No check is made to determine that a MIB node corresponds to the “starting portion” of the OID
until the first wildcard.
Example
The following command creates a view that includes all objects in the MIB-II system group
except for sysServices (System 7) and all objects for interface 1 in the MIB-II interface group.
Console(config)# snmp-server view user-view system included
Console(config)# snmp-server view user-view system.7 excluded
Console(config)# snmp-server view user-view ifEntry.*.1 included