HP Bc1500 - BladeSystem - Blade PC Reference Manual Download Page 401

Page: 401 / 432

HP PC Blade Switch CLI Reference Guide

www.hp.com

28-7

VLAN Commands

switchport access vlan

The

switchport access vlan

Interface Configuration mode command configures the VLAN ID

when the interface is in access mode. To return to the default configuration, use the

form of

this command.

Syntax

switchport access

vlan {

vlan-id

| dynamic}

no switchport access vlan

Parameters

■

vlan-id

— Specifies the ID of the VLAN to which the port is configured.

■

dynamic

—Indicates that the port is assigned to a VLAN based on the source MAC address

of the host connected to the port.

Default Setting

Odd ports 1-41, 42, 45, and 46 are all in VLAN 1. The remaining ports are in VLAN 2.

Command Mode

Interface configuration (Ethernet, port-channel) mode

Command Usage

The command automatically removes the port from the previous VLAN and adds it to the new
VLAN.

Example

The following command configures Ethernet port 1/e16 in access mode to be member of
VLAN 23.

Console(config)#

interface ethernet

1/e16

Console(config-if)#

switchport access vlan

Summary of Contents for Bc1500 - BladeSystem - Blade PC

















































































































































































































































































































































































































































Search results

Summary of Contents for Bc1500 - BladeSystem - Blade PC

Reviews:

Related manuals for Bc1500 - BladeSystem - Blade PC

Brands by name

Popular brands

HP Bc1500 - BladeSystem - Blade PC, Reference Manual

Search results

Summary of Contents for Bc1500 - BladeSystem - Blade PC

Reviews:

Related manuals for Bc1500 - BladeSystem - Blade PC

Brands by name

Popular brands