HP Bc1500 - BladeSystem - Blade PC Reference Manual Download Page 404

Page: 404 / 432

28-10

www.hp.com

HP PC Blade Switch CLI Reference Guide

VLAN Commands

switchport general allowed vlan

The

switchport general allowed vlan

Interface Configuration mode command adds or removes

VLANs from a general port.

Syntax

switchport general allowed vlan add vlan-list

[

tagged

untagged

]

switchport general allowed vlan remove

vlan-lis

Parameters

■

add

vlan-list

— Specifies the list of VLAN IDs to be added. Separate nonconsecutive VLAN

IDs with a comma and no spaces. A hyphen designates a range of IDs.

■

remove

vlan-list

— Specifies the list of VLAN IDs to be removed. Separate nonconsecutive

VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs.

■

tagged

— Indicates that the port transmits tagged packets for the VLANs.

■

untagged

— Indicates that the port transmits untagged packets for the VLANs.

Default Setting

If the port is added to a VLAN without specifying tagged or untagged, the default setting is
tagged.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

Command Usage

This command enables changing the egress rule (e.g., from tagged to untagged) without first
removing the VLAN from the list.

Example

The following commands add VLANs 2, 5, and 6 to the allowed list of Ethernet port 1/e16 .

Console(config)#

interface ethernet

1/e16

Console(config-if)#

switchport general allowed vlan add

2,5-6

tagged

Summary of Contents for Bc1500 - BladeSystem - Blade PC

















































































































































































































































































































































































































































Search results

Summary of Contents for Bc1500 - BladeSystem - Blade PC

Reviews:

Related manuals for Bc1500 - BladeSystem - Blade PC

Brands by name

Popular brands

HP Bc1500 - BladeSystem - Blade PC, Reference Manual

Search results

Summary of Contents for Bc1500 - BladeSystem - Blade PC

Reviews:

Related manuals for Bc1500 - BladeSystem - Blade PC

Brands by name

Popular brands