HP Bc1500 - BladeSystem - Blade PC, Reference Manual

Page: 280 / 432

21-10 www.hp.com HP PC Blade Switch CLI Reference Guide
SNMP Commands
snmp-server filter
The snmp-server filter Global Configuration mode command creates or updates a Simple
Network Management Protocol (SNMP) server filter entry. To remove the specified SNMP
server filter entry, use the
no form of this command.
Syntax
snmp-server filter filter-name oid-tree { included | excluded }
no snmp-server filter filter-name [ oid-tree ]
Parameters
■
filter-name — Specifies the label for the filter record that is being updated or created. The
name is used to reference the record. (Range: 1-30 characters)
■
oid-tree — Specifies the object identifier of the ASN.1 subtree to be included or excluded
from the view. To identify the subtree, specify a text string consisting of numbers, such as
1.3.6.2.4, or a word, such as system. Replace a single sub-identifier with the asterisk (*)
wildcard to specify a subtree family; for example, 1.3.*.4.
■
included — Indicates that the filter type is included.
■
excluded — Indicates that the filter type is excluded.
Default Setting
No filter entry exists.
Command Mode
Global Configuration mode
Command Usage
This command can be entered multiple times for the same filter record. Later lines take
precedence when an object identifier is included in two or more lines.
Example
The following command creates a filter that includes all objects in the MIB-II system group
except for sysServices (System 7) and all objects for interface 1 in the MIB-II interfaces group.
Console(config)# snmp-server filter filter-name system included
Console(config)# snmp-server filter filter-name system.7 excluded
Console(config)# snmp-server filter filter-name ifEntry.*.1 included