manualshive.com logo in svg

HP Bc1500 - BladeSystem - Blade PC, Reference Manual

The HP Bc1500 Blade PC is a cutting-edge BladeSystem designed for high-performance computing. For a hassle-free and seamless experience, easily access the comprehensive User Manual of this incredible product for free download from our website. Get started with HP Bc1500 by visiting manualshive.com.

Share
Download
background image

HP PC Blade Switch CLI Reference Guide

www.hp.com

11-9

IP Addressing Commands

ip domain-lookup

The 

ip domain-lookup

 Global Configuration mode command enables the IP Domain Naming 

System (DNS)-based host name-to-address translation. To disable DNS-based host 
name-to-address translation, use the 

no 

form of this command.

Syntax

ip domain-lookup 

no ip domain-lookup

Parameters

There are no parameters for this command.

Default Setting

IP Domain Naming System (DNS)-based host name-to-address translation is enabled.

Command Mode

Global Configuration mode

Command Usage

There are no user guidelines for this command.

Example

The following command enables IP Domain Naming System (DNS)-based host name-to-address 
translation.

Console(config)# 

ip domain-lookup

Summary of Contents for Bc1500 - BladeSystem - Blade PC

















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Bc1500 - BladeSystem - Blade PC

IBM Personal Computer Manual To Operations preview
Personal Computer
Brand: IBM Pages: 318
IAC INDUSTRIES D4 Assembly Instructions Manual preview
D4
Brand: IAC INDUSTRIES Pages: 11
Compaq StorageWorks 4300 Overview preview
StorageWorks 4300
Brand: Compaq Pages: 21
Aaeon BOXER-8230AI User Manual preview
BOXER-8230AI
Brand: Aaeon Pages: 45
Gateway 03-DT009-01S User Manual preview
03-DT009-01S
Brand: Gateway Pages: 108
Cartft CALUCORE-M Assemly Tutorial preview
CALUCORE-M
Brand: Cartft Pages: 10
Elo Touch Solutions EloPOS 15'' Series User Manual preview
EloPOS 15'' Series
Brand: Elo Touch Solutions Pages: 39
Compaq Presario 7360 Maintenance And Service Manual preview
Presario 7360
Brand: Compaq Pages: 69
Wincomm WPC-766 User Manual preview
WPC-766
Brand: Wincomm Pages: 58
Vivo DESK-V000EE Instruction Manual preview
DESK-V000EE
Brand: Vivo Pages: 4
Lobo Drives Max-80 Hardware Setup preview
Max-80
Brand: Lobo Drives Pages: 40
Dell Latitude 3440 Owner'S Manual preview
Latitude 3440
Brand: Dell Pages: 57
Dell Insprion 8100 Setup Manual preview
Insprion 8100
Brand: Dell Pages: 80
Dell OptiPlex SX260 Setup And Quick Reference Manual preview
OptiPlex SX260
Brand: Dell Pages: 112
Dell OptiPlex 5250 Owner'S Manual preview
OptiPlex 5250
Brand: Dell Pages: 78
Dell OptiPlex 3240 Owner'S Manual preview
OptiPlex 3240
Brand: Dell Pages: 57
Dell OptiPlex FX170 Quick Setup Manual preview
OptiPlex FX170
Brand: Dell Pages: 144
Dell OptiPlex 5480 All-in-One Service Manual preview
OptiPlex 5480 All-in-One
Brand: Dell Pages: 102

Brands by name

Popular brands

Load more brands