HP Bc1500 - BladeSystem - Blade PC Reference Manual Download Page 209

Page: 209 / 432

HP PC Blade Switch CLI Reference Guide

www.hp.com

16-3

Port Channel Commands

channel-group

The

channel-group

Interface Configuration (Ethernet) mode command associates a port with a

port-channel. To remove a port from a port-channel, use the

form of this command.

Syntax

channel-group

port-channel-number

mode

{

auto

}

no channel-group

Parameters

■

port-channel_number

— Specifies the ID of the valid port-channel for the current port to

join.

■

— Forces the port to join a channel without an LACP operation.

■

auto

— Allows the port to join a channel as a result of an LACP operation.

Default Setting

The port is not assigned to a port-channel.

Command Mode

Interface Configuration (Ethernet) mode

Command Usage

There are no user guidelines for this command.

Example

The following command forces port 1/e1 to join port-channel 1 without an LACP operation.

Console(config)#

interface ethernet

1/e1

Console(config-if)#

channel-group 1 mode on

Summary of Contents for Bc1500 - BladeSystem - Blade PC

















































































































































































































































































































































































































































Search results

Summary of Contents for Bc1500 - BladeSystem - Blade PC

Reviews:

Related manuals for Bc1500 - BladeSystem - Blade PC

Brands by name

Popular brands

HP Bc1500 - BladeSystem - Blade PC, Reference Manual

Search results

Summary of Contents for Bc1500 - BladeSystem - Blade PC

Reviews:

Related manuals for Bc1500 - BladeSystem - Blade PC

Brands by name

Popular brands