set escape
The
set escape
command sets a new escape sequence for invoking the RMC. The escape
sequence can be any string, but cannot exceed 14 characters. A typical escape sequence
includes two or more control characters.
set init
The
set init
command sets the modem initialization string. The string is limited to 31
characters and is converted to uppercase.
set logout
The
set logout
command sets the amount of time before the RMC terminates an inactive
modem connection. The default is 20 minutes.
The settings are in tens of minutes (0-9). The zero (0) setting disables logout. When logout
is disabled, the RMC never disconnects an idle modem session.
set password
The
set password
command lets you set or change the password requested at the beginning
of a modem session. You must set a password to enable access through a modem. The
string cannot exceed 14 characters and is not echoed to the screen.
set user
The
set user
command allows the user to set a user string to be displayed by the
status
command. This string is typically used to make notes about the current status of the system.
The string is limited to 63 characters.
status
The
status
command displays information about the current status of the system and its
RMC settings. (See section 6.6.1.)
6-44
hp AlphaServer TS15 Owner’s Guide
