HP 8591C, User Manual, Page: 246 / 373

I
Receiver, Setup, and AUX CTRL Menu Maps and Descriptions
Descriptions
Allows you to access the used to set up defaults for channel tuning
configuration, input configuration, non-interfering RF and video measurement
and channel to test for system beats.
The channel tuning include STD , AIR, IRC , HRC , T ,
USR CH 0 CNTR , and USR CH 0 SPAN
The analyzer input include EXT PAD YES NO (50
spectrum analyzers only), EXT AMP YES NO , and TOTL PWR INPUT
The non-interfering RF and video measurement include
GATING YES NO and PAUSE YES NO . These functions apply to
channel measurement (CHANNEL mode only.
The System is used to specify the channel you wish to
use for testing beats. The default measurement frequency for CTB is 6
MHz above the visual carrier; the default measurement frequency for CSO
is 4.75 MHz above the visual carrier. These values can be changed using
CT3 OFFSET and CSO OFFSET.
These settings are stored in nonvolatile analyzer memory. This means that
the analyzer retains the selections, even when power is turned off, until a
new selection is made. Press CABLE TV ANALYZER to access Setup
See Also
Descriptions for above mentioned in this chapter.
“Step 1. the test system” in Chapter 2.
7-15