HP 8591C, User Manual, Page: 128 / 373

I
System Measurements
Making Timed System Measurements
Press TIME INTERVAL , then enter the time interval between
measurements using the data keys, then press Enter the
time
interval in an hour, minute, 24-hour format.
If you want the results to be printed, press DUMP TO PRINTER . For
information about connecting the printer to the analyzer, see “Step 3.
Install a printer” in Chapter 1.
11. If you want the results to be stored on the RAM card, press
DUMP TO RAM CARD You will be prompted for a number under
which the first data file will be stored. Enter a starting number, then
press
If you want to stop the testing, press ABORT. (It will take several
seconds for the testing to stop.)
2 3 , 1 9 9 3
.
T I M E
S T A R T T I M E s t a r t
S T O P E n t e r S t o p
t i n e
STOP
T I M E I N T E R V A L
tine
between Strt
T I M E
P R I N T E R S t a r t t e s t i n g w i t h
results
sent to printer
T I M E
RRM CRRO S t a r t t e s t i n g w i t h
INTERVAL
r e s u l t s s t o r e d R A N C a r d
M a i n R e t u r n t o M e n u
T O
P R I N T E R
T O
S T A R T : 9 3 1 1 2 3 a t
S T O P D A T E / T I M E 9 3 1 1 2 3 a t
T I M E
I N T E R V A L :
M a i n
RT
Figure 3-12. Timed System Measurements
3-21