manualshive.com logo in svg

HP 8591C, User Manual, Page: 230 / 373

Share
Download
HP 8591C User Manual Download Page 230

I

System Measurements Menu Map and 

 Descriptions

System Measurements 

 Function Descriptions

 

Allows you to confirm that you want to perform the function. If you press

CLEAR TST PLAN and then press YES , you have selected to clear the

current test plan from analyzer memory. If you enter a channel by using

ENTER BY CHANNEL or ENTER BY RANGE and then press YES, the channel

or range of channels will be treated as scrambled channels. If you press

Measure 

Now and then press YES , CTB testing will be performed.

YES is accessed by pressing CLEAR TST PLAN , or entering a channel

number with ENTER BY CHANNEL or ENTER 

 RANGE, or by pressing

Measure Now.

6-37

Summary of Contents for 8591C






















































































































































































































































































































































































Reviews:

No comments