HP 8591C, User Manual, Page: 186 / 373

Channel Measurements Menu Map and Descriptions
Channel Measurements Function Descriptions
The save trace B to internal memory function stores trace B in internal
memory.
This function simplifies saving either a reference trace or a test result to
internal memory. This trace can also be saved to a memory card using
procedures provided in the analyzer user’s guide.
Procedure
1. After setting up to display the desired trace, press SAVE TRB TO INT
2. The message (ENTER O-5 or 11 THRU MAX REG appears. Enter a
trace register number between 0 and the MAX REG then press
Note that registers 6 through 10 are used by the HP 85721A personality.
Therefore, it is recommended not to use these registers to save the
reference trace.
3. Trace B is saved internally when the message TRACE B SAVED appears as
shown in Figure
23,
1993
i5.i AT
PEAK
LOG
RESP
TAKE REF
TRACE
SAVE TRB
TO
RECALL
FRH INT
STOP 425.0 MHz
VBW MHz 20.0 RT
RES BW 3.8
Figure Trace B, Saved
5-21