manualshive.com logo in svg

HP 8591C, User Manual, Page: 162 / 373

Share
Download
HP 8591C User Manual Download Page 162

I

If You Have a Problem

Other Problems

If the wrong date or time is displayed

The analyzer has a real-time clock that is powered by an internal battery.

If the real-time clock is set to the wrong time or date, use the following
procedure to reset the time and date:

1. Press 

 

2. If the time and date are not displayed in the upper-left corner of the

analyzer screen, press 

 ON OFF so that ON is underlined.

 To reset the time, press SET TIME , enter the time (in 24-hour format) in

the hour, minute, second format using the data keys, then press 
For example, entering 133010 corresponds 

 

4. To reset the date, press SET DATE , enter the date in the year, month, day

format, then press 

 For example, entering 910305 corresponds to

March 5, 1991.

Summary of Contents for 8591C






















































































































































































































































































































































































Reviews:

No comments