HP 8591C User Manual Download Page 202

Page: 202 / 373

System Measurements Menu Map and

Descriptions

System Measurements

Function Descriptions

Allows you to clear all selected tests for the current channel. Press

CABLE TV ANALYZER, SYSTEM

More 1 of 2, Create

ENTER BY CBANNEL or ENTER BY RANGE , YES or NO to access

CLEAR TESTS

Allows you to clear the current test plan.

CLEAR TST PLAN clears the current test plan by removing the channel

numbers and the tests for those channels from the current test plan.

CLEAR TST PLAN does

not

do any of the following:

Delete any of the test plans that have been saved in analyzer memory

(plans 1 through 5).

Delete any of the test plans that have been saved on a RAM card.

Delete the location code (if one was entered).

Delete the temperature entry (if one was entered).

Press CABLE TV ANALYZER , SYSTEM

, More 1 of 2 ,

Create

to access CLEAR TST PLAN

See Also

“Clearing the Current Test Plan” in Chapter 3.

6 - 9

Summary of Contents for 8591C






















































































































































































































































































































































































Search results

Summary of Contents for 8591C

Reviews:

HP 8591C, User Manual, Page: 202 / 373

Search results

Summary of Contents for 8591C

Reviews: