HP 8591C, User Manual, Page: 131 / 373

I
System Measurements
Creating a Test Plan
l
If you selected a video test (differential gain, differential phase, and/or
delay), enter the line number of the test signal, odd or
even field, and the desired test signal type when prompted.
l
If you selected the in-channel frequency response test, enter the
frequency response line number, odd, even, or both fields, and the
desired test signal type when prompted.
After you have selected the test or tests, press DONE
7. If you want to enter another channel, repeat steps 3 through 6. If you do
not want to enter another channel, press Prev Menu.
If you want to view selected channels, press VIEW CH SEL
You can enter channels into the test plan as individual channels or as a range
of channels. This procedure describes how to enter channels individually into
the test plan. The
next
procedure describes how to enter a range
into the test plan.
of channels
E N T E R C h a n n e l n u m b e r u s i n g t h e k e y p a d .
P r e s s M e n u w h e n d o n e c h a n n e l s .
D E L E T E a C h a n n e l , E N T E R a s
status
s e l e c t e d C h a n n e l s , E N T E R C h a n n e l n u m b e r )
C H S E L
M e n u
RT
Figure Enter by Channel
3-24