manualshive.com logo in svg

HP 8591C, User Manual, Page: 135 / 373

Share
Download
HP 8591C User Manual Download Page 135

I

System Measurements

Creating a Test Plan

Step 3. Save the current test plan in internal memory

N O T E

Test plans 1 through 5 are saved in trace registers 6 through 10 in the analyzer.   not save traces in
trace registers 6 through IO or your test plans will be overwritten.

1. If Save TstPlan is not displayed, press 

 CABLE TV ANALYZER ,

SYSTEM 

 More 1 of 2, Create TstPlan

2. A title can be entered with each test plan. The title can be used to

differentiate between test plans. The title is shown when cataloging
analyzer memory. See “Cataloging Analyzer Memory” in this chapter.

a. If you want to create a title using the analyzer’s keys, press 

then CHANGE TITLE, 

 SPC CLEAR, CLEAR to clear the current

title.

b. Use the 

 to create a new title. For example, press ABCDEF , C ,

ABCDEF , A , STUVWX , T , STUVWX , V to create the title “CATV.”

 Press 

 

 to return to the Create 

 menu.

d. If you want to create a title using an external keyboard, press 

 on the external keyboard to clear the current title. Press 

then the keys to create the title, the press 

3-28

Summary of Contents for 8591C






















































































































































































































































































































































































Reviews:

No comments